clear ospf counters

clear ospf counters { interfaces [all | vlan vlan_name | area area-identifier] | area [all | area-identifier] | virtual-link [all | router-identifier area-identifier] | neighbor [all | routerid [ip-address {ip-mask} | ipNetmask] | vlan vlan_name]| system}

Description

Clears the OSPF counters (statistics).

Syntax Description


`vlan_name`	Specifies a VLAN name.
`router-identifier`	Specifies a router interface number.
`area-identifier`	Specifies an OSPF area.
`ip-address`	Specifies an IP address
`ip-mask`	Specifies a subnet mask.
`ipNetmask`	Specifies IP address / Netmask.
system	Specifies the OSPF system counters.

Default

N/A.

Usage Guidelines

The global command clear counters also clears all OSPF counters. This global command is the equivalent of clear ospf counters for OSPF.

Example

The following command clears the OSPF counters for area 1.1.1.1:

clear ospf counters area 1.1.1.1

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on platforms with Base license, or higher, as described in the Switch Engine v33.1.1 Licensing Guide document.